Table of Contents
Advertisement
Installation & Operation Manual
7 How to Navigate Screens in Control Air M/M+
7.1 Login
The following displays if the screen you selected requires a password.
Enter your password, then touch Done.
Figure 10
Each screen is programmed with one of the following password levels:
A screen having this
password level...
A user logged in with the User, Admin, or
User
A user logged in with the Admin or Factory
Admin
Factory
A user logged in with the Factory password
No password
Table 4
The default password for a new Control Air M/M+ is 0000.
You can change passwords on the Control Air M/M+ by going to
Touchscreen Setup > Passwords screen.
You log out on the Setup screen.
BTC 469503103 A | 02.2019
Can be accessed by...
Factory password
password
Anyone
Control Air M/M+ Water to Water Applications | 11
7.2 Alarms
The Alarm screen allows the user to view up to 100 events starting with
the most recent. It also allows user to see which points have gone into
alarm and retuned to normal as well as the ones that have been manually
cleared.
Figure 11
7.3 Trends
Figure 12
This screen can be accessed from the Help Screen on the Service page
(Home -> Service -> Help -> Trends). It allows the end user to view trends
for points that have trending enabled.
Figure 13
Data subject to change
Advertisement
Table of Contents
