Table of Contents
Advertisement
4.4.5
Refilling
This screen must always be filled in if a refill takes place.
If the DIMES module inside the valve is changed, it will be necessary to register the new number.
The input takes place using a separate mask, which is opened up after the "New entry" button is
operated. After the data has been entered, click on the „OK" button to confirm and wait until the
entry appears in the table. Exit the mask by pressing "Cancel" if necessary.
The „Load" button displays the data already registered.
The „Edit data" button allows corrections to the data, but only to those of the user who is currently
logged in.
After completing the correct entries, save all the data by pressing the „Save" button .
The registration of the data will be carried out by the service technician.
Field 1
Date
This field has been configured by the manufacturer.
Field 2
Serial number DIMES
The serial number will be recorded by the service technician on the DIMES module.
Field 3
Cylinder data
The cylinder number and the valve batch number are recorded by the service technician.
Field 4
Filling pressure test measurement (bar)
The current filling pressure of the Lifdes
the service technician.
Field 5
Filling pressure after 20 minutes (bar)
The filling pressure after 20 min from the Lifdes
by the service technician.
An electronic pressure gauge (manometer) is used for this.
Field 6
Filling level in %
The filling level is recorded by the service technician according to the measurement with
DIMES.
Field 7
Remarks
For free use
Length of the field
Use of this field is not obligatory
4.5
Incident
The incidents will be automatically recorded with sequential numbers and the date and time. The
highest number always represents the latest incident and is displayed as the first field.
The normal conditions are shown with a green background, and the abnormal conditions with red.
The page is provided with a scroll mode that always shows the latest status.
Non-current states will be pushed into the background, but will be taken into account when printing
out.
The „Load" button shows the current status in each case.
No password is needed to read or print out the incidents.
4.6
Extras
The Time and Date window indicates the last incident.
By actuating „Update", the time will be set to the „Actual status".
Resetting the Time and Date requires access by the Administrator.
Building Technologies
Fire Safety
TM
with the ball valve closed will be recorded by
TM
with the ball valve closed are recorded
Max.
16 characters
Reading out the data storage unit
A54475-A1-A2_EN_05.docx
21
01.2018
Hide quick links:
Advertisement
Table of Contents
