Electrolux 38TCIO User Manual page 27

Sticking on the seal
• Clean the worktop around the cut-
out area.
• Stick the single-sided adhesive seal-
ing tape provided on the underside
of the hob around the outside edge
ensuring that it is not stretched. The
two ends of the tape should join in
the middle of one side. After trim-
ming the tape (allow it to overlap by
2-3 mm), press the two ends togeth-
er.
• If installing proud of the work sur-
face, use the sealing tape with di-
mensions 6x2mm.
6mm x 2 mm
installation proud of the work surface electrolux 27