Removing The Flexible Nic - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
l
----End

7.43 Removing the flexible NIC

Remove the flexible NIC before replacing it with a new one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 3 Power off the 5288 V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the 5288 V3 and put it on an ESD desktop. For details, see
Server.
Step 6 Remove the chassis cover. For details, see
Step 7 Remove the I/O module above the flexible NIC. For details, see
Card.
Step 8 Remove the cables from the flexible NIC.
Step 9 Loosen the screws on the flexible NIC using a Phillips screwdriver. See step (1) in
7-91.
Issue 26 (2018-11-19)
For details about the configuration items that support export and import in the iBMC and
BIOS configuration files exported from the iBMC, see "Configuration File Description"
in the Huawei Server Firmware Upgrade
NOTE
After the mainboard is replaced, the iBMC and BIOS configurations are restored to the default settings
of the new mainboard. You need to reconfigure the iBMC and BIOS according to the actual situation.
The default user name, password, and IP address of the server are listed
Copyright © Huawei Technologies Co., Ltd.
Guide.
1 Safety Instructions.
4.2 Powering Off the Server.
7.11 Removing the Chassis
7 Replacing Parts
in5.1 Default Information.
3.6 Removing the
Cover.
7.19 Removing the Riser
Figure
207