Huawei 5288 V3 V100R003 User Manual page 216

5288 V3 Server
User Guide
Figure 7-90 Installing fan module brackets
Step 16 Install the fan modules. For details, see
Step 17 Install the air duct. For details, see
Step 18 Install the riser cards. For details, see
Step 19 Install the supercapacitor if it is required. For details, see
(RAID Controller
Step 20 Install the chassis cover. For details, see
Step 21 Install the 5288 V3. For details, see
Step 22 Connect all internal cables such as power and network cables. For details, see
External
Step 23 Power on the 5288 V3. For details, see
Step 24 (Optional) To burn the original equipment serial number (ESN) into the new mainboard after
replacement, contact Huawei engineers.
Step 25 (Optional) Configure the server.
l
l
Issue 26 (2018-11-19)
Card).
Cables.
NOTE
If original device SN is not burnt in the new mainboard, the iBMC and OS cannot obtain the device SN.
This may affect the running of some services or the monitoring and management on the device.
If the iBMC and BIOS configuration data is exported before the mainboard replacement,
import the data to the server and configure the password. For details, see Import/Export
in the Huawei Server Firmware Upgrade
To upgrade the firmware (iBMC, BIOS, and CPLD) of the mainboard after replacement,
see the Huawei Rack Server iBMC User
Copyright © Huawei Technologies Co., Ltd.
7.16 Installing a Fan
7.14 Installing the Air
7.20 Installing a Riser
7.35 Installing the Supercapacitor
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
Guide.
Guide.
7 Replacing Parts
Module.
Duct.
Card.
Cover.
3.5 Connecting
Server.
206