Siemens sitrans p Operating Instructions Manual page 5

Qualified Personnel
Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are
defined as persons who are authorized to commission, to ground and to tag circuits, equipment, and
systems in accordance with established safety practices and standards.
Correct Usage
Note the following:
WARNING
!
This device and its components may only be used for the applications described in the catalog
or the technical description, and only in connection with devices or components from other
manufacturers which have been approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and
installed correctly, and operated and maintained as recommended.
Trademarks
SIPART, SIREC, SITRANS are registered trademarks of SIEMENS AG.
Third parties using for their own purposes any other names in this document which refer to trademarks
might infringe upon the rights of the trademark owners.
Copyright © Siemens AG 2004
All rights reserved
The reproduction, transmission or use of this
document or its contents is not permitted without
express written authority. Offenders will be liable
for damages. All rights, including rights created
by patent grant or registration of a utility model or
design, are reserved.
Siemens AG
Bereich Automation and Drives
Geschäftsgebiet Process Instrumentation and
Analytics
76181 Karlsruhe
28
Disclaimer of Liability
We have checked the contents of this manual for
agreement with the hardware and software
described. Since deviations cannot be precluded
entirely, we cannot guarantee full agreement.
However, the data in this manual are reviewed
regularly and any necessary corrections included in
subsequent editions. Suggestions for improvement
are welcomed.
© Siemens AG 2004
Technical data subject to change.
Operating Instructions
SITRANS P Compact
A5E00240593-01