Connecting The Flx Uc 1000 To A Computer - Yamaha REVOLABS FLX UC 1000 Installation And Operation Manual

Once connected to a power source, the device will boot up. The lights on the
Base will alternate red-orange-green-orange as the system boots. When it is
ready to use, the Base will chime and the Dialer will bring up the home screen.

Connecting the FLX UC 1000 to a Computer

Using the USB cable that came with the device, connect the mini USB side of
the cable into the connector identified by the icon in the figure below.
Connect the other end of the cable to the USB port on the computer that will be
used with the FLX UC 1000 for third party softphone, webinar, or conferencing
applications.
The computer may detect new driver software and install it, wait until the
install has succeeded before continuing. Once this is complete, a white USB
symbol should appear in the quick-reference bar at the top of the dialer screen.
For optimal audio performance when using Windows, please follow the
instructions in the appendix section.
9