FLX UC 1000 Device Manager
This application provides an interface for easy access to softphone controls,
configuration for a variety of softphones, conferencing, or webinar applications,
configuration of application specific commands for answer, reject, and hang up
support directly from the FLX UC 1000, and configuration for launching upon
windows start-up.
Third Party Applications Supported
Product Name
Skype™
Vidyo
Cisco Jabber
Cisco
IP Communicator
®
Microsoft Lync
Citrix GoToMeeting
Cisco WebEx
X-Lite™
Broadsoft UC One
Installation & Third Party Application Configuration
For Windows
1. Download firmware bundle from the https://uc.yamaha.com/resources/
support/
2. Navigate to Start, Programs, Revolabs, FLX UC Device Manager and open the
application.
3. Connect the FLX UC 1000 to the PC. Device drivers should be installed
when the unit is connected to the computer.
4. Click on Settings and select the application from the drop down menu that
you plan to use.
5. Click Configure if the option is presented, or OK. Configure will bring user to
another menu allowing application specific configuration of the hot keys for
hang up and answer. This option is only provided when using Skype.
Note: Softphone and device status are displayed in FLX UC Device Manager
Home Screen.
®
®
®
®
®
®
Software Version
6.21 and older
3.4, 3.5
10.5.0
8.6.4.0
15.0.4420.1017
6.4.10
29.10.1.10.115
4.7.1
21.0.0.158
33