Making A Call While Another Call Is Already Active; Answering An Incoming Call; Ignoring An Incoming Call; Hanging Up A Call - Yamaha REVOLABS FLX UC 1000 Installation And Operation Manual

The default number of the contact is the one with the green selection next to it
in that contact's mini-menu.

Making a call while another call is already active

Select [New Call] along the bottom of the screen and dial the second number.
The first call will be put on hold and the second call will now be active. To
switch between calls, use the black outline to select the second call with the up
or down arrowkeys, then press the [Resume] button at the bottom of the
screen. This will switch the selective call to active, and put the previous call on
hold.

Answering an Incoming Call

While on a call, answer an incoming call by hitting the green answer button on
the dialer or base.

Ignoring an Incoming Call

To ignore the incoming call, select it through the dialer and press the [Ignore]
button.

Hanging Up a Call

Pressing the red hang-up button will hang up on your ongoing call.

Using USB Audio on the FLX UC 1000

Using the Web UI or the Admin settings for USB Audio on the Dialer, configure
the system for USB Audio by selecting Always On or User Determined.
If USB Audio is not to be used, select Always Off.
If User Determined is selected, turn on USB Audio from the home page of the
Dialer by selecting the [USB On] button at the bottom of the screen.
If audio from the computer isn't playing through the FLX UC 1000, verify the
volume settings and mute settings on the PC to ensure the system is not muted
and the volume level. Verify that the FLX UC 1000 is chosen as the Default
Audio device in the PC Sounds menu, and this should resolve any issues with
the audio playing through the device.
For additional call control (hang-up and answer) with Third Party Conferencing
Applications, please refer to the section on the FLX UC Device Manager.
26