Configuration Example - HP 10500 Series Configuration Manual

Step
4. Enable command
accounting.

Configuration example

Network requirements
As shown in
Configure the device to send commands executed by users to the HWTACACS server to monitor and
control user operations on the device.
Figure 21 Network diagram
Configuration procedure
# Enable the Telnet server.
<Device> system-view
[Device] telnet server enable
# Enable command accounting for user line AUX 1.
[Device] line aux 1
[Device-line-aux1] command accounting
[Device-line-aux1] quit
Command
command accounting
Figure 21, users need to log in to the device to manage the device.
Remarks
By default, command accounting is
disabled. The accounting server does not
record the commands executed by users.
If the command accounting command is
configured in user line class view,
command accounting is enabled on all
user lines in the class. You cannot
configure the undo command accounting
command in the view of a user line in the
class.
73