Administration
Step by Step
32
optiPoint 410 entry
After integrating the optiPoint 410 entry into your net-
work successfully
settings through the "Web-based Management Tool"
page 42.
Entering the administration area
All configuration and diagnostic operations are protect-
ed against illegal accesses by the Administrator pass-
word.
edg
Press keys simultaneously to enter "administration area".
o
Enter admin password
(default: 123456).
r
Terminate the operation.
You are now in the administration area (all LEDs flash).
View settings
You can make the system display the important settings
of your optiPoint 410 entry.
Making changes in the administration area (see above).
Press the 2
o
Enter the 2-digit code (Table
sired function.
r
Confirm the entry.
The settings are displayed through different illumina-
tions of the LEDs. The table on
the meaning of the LEDs.
page 16, you can make all other
If you are in the administration area, you cannot
reach the optiPoint 410 entry ("offline").
nd
function key from the top.
optiPoint 410 entry
page 103) for the de-
page 100 describes