Atdl Redial Last Number Used - Siemens Brodersen MC55 AT Command Manual

7.8

ATDL Redial last number used

Syntax
Exec Command
ATDL[;]
Response(s)
If there is no last number or number is not valid:
+CME ERROR
If no dialtone (parameter ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
If successfully connected and non-voice call (TA switches to online data mode):
CONNECT <text>
When TA returns to command mode after call release:
OK
If successfully connected and voice call:
OK
Reference(s)
V.250
Command Description
This command redials the last voice and data call number used in the ATD command. If terminated with semi-
colon ";" ATDL dials the last voice call number stored in the "LD" phonebook. Otherwise, the last dialed data or
fax number will be used (not contained in the "LD" phonebook).
Notes
• This command may be aborted generally by receiving a character during execution. Abortion is not possible
during some states of connection setup such as handshaking.
• Parameter "I" and "i" only if no *#-code is within the dial string.
MC55_ATC_V04.00
Confidential / Released
PIN ASC0 ASC1
% % §
Page 135 of 475
MUX1 MUX2 MUX3 Charge
% § § !
Last
! !
3/17/06