Table of Contents
Advertisement
Executing the Self Diagnostics
The ES-7 has a self-diagnostics function that helps you
to locate the cause of the problem when trouble occurs
in the system.
Technical service will be able to assist you more
rapidly if you report the results of self diagnostics
when requesting repairs for the system.
This section will explain the basics of using the self
diagnostics function.
For more detailed information, refer to the online manual.
Proceed as follows to execute the self diagnostics.
1
Log on using the procedure explained in "Starting
the System" (page 17).
The desktop appears on the screen.
2
Click the Start button on the taskbar, point to
Programs and Sony EditStation in this order, and
click SelfDiag.
The initial screen of the self diagnostics software
appears.
..........................................................................................................................................................................................................
1) A file that records the date and time of the self
diagnostics and the error status of each block.
3
Click the System Check button.
The self diagnostics start, and the operation of each
block in the system is checked.
If any errors are discovered by the self diagnostics,
they are recorded in an error log
To check a specific block
In the initial screen of the self diagnostics software,
click the button for the block you want to check.
To view the error log
In the initial screen of the self diagnostics software,
click the Error Log button.
For information about the contents of the error log, refer to
the online manual.
Chapter 3 Connections and Settings
1)
.
93
Advertisement
Table of Contents
