Table of Contents
Advertisement
Optional Components and Software
Optional System Upgrade
Devices
ESBK-7045 Disk Unit
This is a hard disk drive for storage of video and audio
signals. The fast random access of the hard disk means
that any part of the data can be accessed quickly.
Unlike clips stored on tape, clips stored on a disk unit
can be cued up instantly. In high-quality mode, one
disk unit can store up to one hour of video. Up to four
disk units can be connected to the EditStation.
ESBK-7041 Disk Recorder Board
This board installs in a slot on the motherboard of the
EditStation. It controls the ESBK-7045 Disk Unit and
enables non-linear editing using data on the disk unit.
ESBK-7011 Control Panel
This is a control panel for the EditStation featuring a
jog/shuttle dial, a fader lever, adjustment knobs,
MARK IN and MARK OUT buttons, and other editing
controls. Use of the control panel makes it easy to
control tape transport, adjust edit points, and manually
specify the timing of edit transitions.
Optional Expansion Boards
ESBK-7021 Basic DME Switcher Board
This is a set of two expansion boards that install in
slots on the motherboard of the EditStation. The
boards provide video and audio switcher functions and
two-dimensional DME (Digital Multi-Effects)
functions. They also provide color correction, a
downstream keyer, and a chroma key function.
ESBK-7022 3D Effect Board for Basic DME
Switcher
This is a daughter board that installs on the Basic
DME Switcher Board. It provides linear and non-linear
three-dimensional special effects.
14
Chapter 1 Overview
ESBK-7023 Advanced DME Switcher
Board
This is a set of two expansion boards that install in
slots on the motherboard of the EditStation. The
boards provide video and audio switcher functions and
two-dimensional DME (Digital Multi-Effects)
functions. They also provide color correction, a
downstream keyer, and a chroma key function.
Compared to the Basic DME Switcher Board, these
boards provide even higher picture quality, enabling
the addition of a wide variety of advanced special
effects.
ESBK-7024 3D Effect Board for Advanced
DME Switcher
This is a daughter board that installs on the Advanced
DME Switcher Board. It provides linear and non-linear
three-dimensional special effects.
It also provides lighting and trails effects.
ESBK-7025 External Switcher Interface
Board
This is an expansion board that installs in a slot on the
motherboard of the EditStation.
It enables control of DFS-500/500P or DFS-300/300P
DME Switcher from the EditStation while playing
back VCR tapes for linear editing.
ESBK-7031 QSDI Interface Board
This is an expansion board that installs in a slot on the
motherboard of the EditStation. It enables input and
output of QSDI video signals and AES/EBU digital
audio signals. Install this board when you wish to
connect equipment such as a DSR-series VCR, a CD
player, or a DAT (Digital Audio Tape) recorder and
player for input and output of digital audio signals.
Advertisement
Table of Contents
