Connecting System Components; Connecting Vcrs - Sony EditStation ES-7 Operating Instructions Manual

Connecting System Components

This section provides examples that show how to
connect the components in your editing system.

Connecting VCRs

The VCR connection examples in this section assume
that an ESBK-7045 Disk Unit has been connected to
the EditStation.
Connecting analog VCRs
You can do the following with a system configured as
shown below.
• Do linear editing using materials stored on tape and
VCR playback.
• Copy clips from tape to the disk recorder.
1
2
2
3
2
REMOTE
COMPONENT 2
OUTPUT
VCR switch settings
Switch Recorder
REMOTE/LOCAL REMOTE
VIDEO IN Y–R, B
REF. VIDEO 75 Ω ON
REF. VIDEO INPUT
UVW-1800/1800P,
VIDEO 1 OUTPUT
COMPONENT 2 OUTPUT
2
REMOTE
RECORDER INPUT
B–Y, R–Y, Y/COMP
RECORDER
PLAYER 2
PLAYER 2
INPUT B–Y,
R–Y, Y/COMP
MON IN
LINE
RECORDER
OUTPUT 1, 2
INPUT 1, 2
REF. VIDEO INPUT
UVW-1800/1800P,
PVW-2800/2800P AUDIO OUTPUT
(Player 2) CH-1, CH-2
Player 1, 2
REMOTE
—
OFF
For more information about connecting a disk unit, see page
71.
• Do non-linear editing using materials stored on the
disk recorder.
• Record the results of the edit on tape as analog
component video signals.
AUDIO INPUT
CH-1, CH-2
AUDIO OUTPUT
PVW-2800/2800P
CH-1, CH-2
(Recorder)
COMPONENT 2
INPUT
3 2
PROGRAM OUTPUT
B–Y, R–Y, Y/G
ES-7
B B OUT 1
PLAYER 1
PLAYER 1
INPUT B–Y,
R–Y, Y/COMP
PLAYER 1
INPUT 1, 2
PLAYER
INPUT 1, 2
2
REF. VIDEO INPUT
1
UVW-1800/1800P,
PVW-2800/2800P
REMOTE
See the digital Betacam VCR connection example (page 68) for
connecting a control panel.
1 Cable with XLR connectors
(option)
1
2 75 Ω coaxial cable with
BNC connectors (option)
3 9-pin remote control cable
(option)
2
AUDIO OUTPUT
(Player 1)
CH-1, CH-2
COMPONENT 2
OUTPUT
Chapter 3 Connections and Settings
3
2
1
67