Sharp UX-A1000 Operation Manual page 71

Sending a fax by Direct Keypad Dialing
You can also enter a full number with the number keys and then press the
START/
MEMORY
key to begin dialing. You can use this method to dial a full number
when you don't need to speak to the other party before faxing.
1
Load the document(s).
•
If desired, press
the resolution and/or contrast.
2
Enter the number of the receiving machine by pressing the number
keys.
•
If a pause is required between any of the digits to access a special service
or an outside line, press
seconds per pause). Several pauses can be entered in a row.
3
Check the display. If the number of the receiving machine shown is
correct, press
•
If the number is not correct, press
a time, and then re-enter the correct digit(s).
to set
RESOLUTION/
RECEPTION MODE
. The pause will appear as a hyphen (two
FUNCTION
START/
MEMORY
.
Sending a Fax by Automatic Dialing
READY TO SEND
to backspace and clear one digit at
STOP
69