Sharp UX-A1000 Operation Manual page 128

Section 5. First Aid Measures
Inhalation: Remove to fresh air. Seek medical attention if breathing becomes difficult.
Ingestion: Immediately rinse mouth out with plenty of water. If within 30 minutes after ingestion, give
victim a small glass of water or milk (NEVER give anything by mouth to an unconscious
person). Contact physician or poison center. Do not induce vomiting unless instructed to
do so by a physician or poison center.
Skin Contact: Remove contaminated clothing. Flush affected area with water. Seek medical attention
if irritation develops and persists.
Eye Contact: Flush immediately with plenty of water. Remove contact lenses and continue flushing for at least
15 minutes. Seek medical attention if irritation develops and persists.
Section 6. Fire Fighting Measures
Flash Point:
Flammability Limits(%): Not applicable
Extinguishing Media:
Fire fighting:
Fire and Explosion Hazard: No unusual fire or explosion hazards are known for this product.
Hazardous Combustion Products: Oxides of carbon, organic acids, low molecular weight organics.
Section 7. Accidental Release Measures
Occupational Spill:
Section 8. Handling and Storage
STORE IN COOL, DRY PLACE
Section 9. Exposure Control/Personal Protection
Ventilation:
Eye Protection:
Protective Clothing:
Gloves:
Section 10. Physical Chemical Characteristics
Description:
Pressurized:
Water Solubility:
Evaporation Rate
(Butylacetate=1):
Section 11. Stability and Reactivity
Stability:
Incompatibilities:
Thermal decomposition products:
Hazardous polymerization:
126
S H A R P
MATERIAL SAFETY DATA SHEET (2/3)
Not applicable
Water, foam, carbon, dioxide or dry chemical.
Fire may produce small amounts of hazardous decomposition products such as
carbon dioxide, carbon monoxide, and unidentified organics. NIOSH approved
self-contained breathing apparatus may be required if a large volume of ink is
involved.
Absorb small ink spills with cloth or paper towels or other suitable material.
Place in a container for disposal. For large spills, dike around spill with absorbent
material.
Transfer contaminated diking material to separate, suitable containers for recovery
or disposal.
Ventilate area and wash spill site after material pickup is complete.
Unless specifically permitted, keep waste out of sewers, watershed and waterways.
Mechanical room ventilation
None needed for intended use in printer.
None needed for intended use in printer.
None needed for intended use in printer.
Black liquid with faint odor.
No
Fully Miscible
Approx. 3.5
None known.
None known.
Oxides of carbon, acid gases, low molecular weight organics.
This product will not polymerize.
Freezing Point:
pH:
Percent Volatile:
Specific Gravity:
Vapor Density (Air=1):
Revised date:
Issued date :Sep.19.2002
MSDS No. B-1028
°
Approx. -12 to -150 C
7.0-8.5
Approx. 18.7
Approx. 1.0 mg/I
Approx. 1.6
.