Table of Contents
Advertisement
9.4
PARAMETER EXPLORER
This view can be displayed:
1.
by clicking on the 'Parameter Explorer' toolbar icon,
2.
by double clicking on the relevant block in the tree pane or in the graphical wiring editor,
3.
by selecting 'Function Block View' from the Function block context menu in the Graphical wiring Editor,
4.
by selecting 'parameter Explorer from the 'View' menu,
5.
by using the short cut <Alt>+<Enter>,
In each case the function block parameters appear in the iTools window in tabular form, such as the example
in Figure 126, below.
The figure above shows the default table layout. Columns can be added/deleted from the view using the
'Columns' item of the Explorer or context menus (Figure 127).
Page 198
FEC920: USER GUIDE
Figure 126 Parameter table example
A5E45696052A Rev-AA
September 18
Advertisement
Table of Contents
