7-7. Solution when error message is displayed
When the error message as shown below is displayed, stop writing data software, restart the DME Satellite and then
start confi rmation of writing the component data from initial.
If the same message is still displayed after restarting the data writing software and the DME Satellite, restart the
personal computer and the DME Satellite and start confi rmation of writing the component data from initial.
Error messages list
" [Error]
Device unreachable."
" [Error]
Port unreachable."
" [Error]
Port control failed."
" [Error]
Component condition failed."
[Writing completed confi rmation screen]
DME4io-ES/DME8i-ES/DME8o-ES
109