16
en | Testing the Transmitter
8
Testing the Transmitter
Test your transmitter by standing within sight of a receiver or siren-strobe. While holding
down the Test button, press the Alarm button until the transmitter emits 3 short beep tones. A
test transmission is sent to the Central Console, lighting the green LED on a receiver or the
strobe on an outdoor siren-strobe. There might be a brief delay of 2 to 3 seconds before the
flashing light appears.
If the receiver's LED or the strobe does not light to confirm a successful test transmission,
retest the transmitter. If you still do not receive confirmation, contact the security
department.
2014.03 | V1.0.0 | DL
Installation Manual
ALLPLEX track Personnel Transmitter
Robert Bosch (SEA) Pte Ltd