All software is provided "AS IS." The sole obligation of BOSCH SECURITY SYSTEMS shall be to make available all published modifications that correct program problems are published within one (1) year from the date of shipment.
This will prevent damage to the unit due to lightning and excessive power line surges. 11. Restricted Access Locations are required for the installation. Robert Bosch (SEA) Pte Ltd Installation Manual 2017.11 | SE3v1.0 | DL...
Security Escort Personnel Transmitter Safety precautions Disposal Your Bosch product has been developed and manufactured using high- quality materials and components that can be reused. This symbol means that electronic and electrical devices that have reached the end of their working life must be disposed of separately from household waste.
This exterior label can use wording such as the following: “Contains IC: 22874-CORRCV433” any similar wording that expresses the same meaning may be used. 1.4.2 Other certification information Robert Bosch (SEA) Pte Ltd Installation Manual 2017.11 | SE3v1.0 | DL...
Security Escort system. When an alarm is initiated, a signal identifying you and your location is sent to the Security Escort Central Console. The Central Console displays your location on a map along with related information. 2017.11 | SE3v1.0 | DL Installation Manual Robert Bosch (SEA) Pte Ltd...
The transmitter is available in the following model. Transmitter Model Description SE-TRM-433T01 Personnel Transmitter, 433 MHz Robert Bosch (SEA) Pte Ltd Installation Manual 2017.11 | SE3v1.0 | DL...
Replacement of the battery with an incorrect type is subject to the risk of explosion. Batteries must not be disposed of in household waste to avoid the risk of explosion. 2017.11 | SE3v1.0 | DL Installation Manual Robert Bosch (SEA) Pte Ltd...
Enabling and Disabling Features | en Enabling and Disabling Features Figure 5.1: Components of the transmitter 1 Dip Switch for Radio Frequency 4 Test Button 2 Battery Compartment 5 Lanyard 3 Alarm Button Robert Bosch (SEA) Pte Ltd Installation Manual 2017.11 | SE3v1.0 | DL...
To fix the transmitter firmly on a belt, secure the clip to the transmitter at the two top positions (no. 4), and at the bottom location (no. 5) using the screw that secures the battery door. 2017.11 | SE3v1.0 | DL Installation Manual Robert Bosch (SEA) Pte Ltd...
433.42 MHz (default) For factory reset For SE-TRM-433T01, only RF 433.42 MHz is supported, where both dip switches 1 and 2 are set to the OFF position as default. Configuring the dip switch to other settings will disable the alarm communication between the transmitter and the receiver.
The transmitter enters operational mode once it exits the configuration mode. Caution! The Security Escort system is not a substitute for safe behavior. Do not take personal risks believing that the system will protect you. 2017.11 | SE3v1.0 | DL Installation Manual Robert Bosch (SEA) Pte Ltd...
To reset the transmitter after a Lanyard Snatch Alarm, reinsert the lanyard pin and perform a test mode. Auto-tracking The Auto-tracking feature sends the latest location to the Central Console every 7 seconds after an alarm is triggered. Robert Bosch (SEA) Pte Ltd Installation Manual 2017.11 | SE3v1.0 | DL...
Transmitter firmware can be upgraded wirelessly via a dedicated coordinator using the Utility Tool of the Security Escort software. For more information on the usage of Utility Tool, please refer to the Security Escort Technical Reference Manual. 2017.11 | SE3v1.0 | DL Installation Manual Robert Bosch (SEA) Pte Ltd...