10
en | Enabling and Disabling Features
5
Enabling and Disabling Features
Figure 5.1: Components of the transmitter
5.1
Selecting Transmitter Radio Frequency
The radio frequency (RF) is set as 304 MHz by default. To change the RF to 303.825 MHz, set
dip switch 1 to the OFF position and dip switch 2 to the ON position. To change the RF to
433.42 MHz, set dip switch 1 to the ON position and dip switch 2 to the OFF position.
2014.03 | V1.0.0 | DL
1 Dip Switch for Radio Frequency
2 Battery Compartment (3V)
3 Alarm Button
4 Test Button
5 Lanyard
Installation Manual
ALLPLEX track Personnel Transmitter
Robert Bosch (SEA) Pte Ltd