GE ADTS542F User Manual page 55

ADTS542F/552F/553F/554F User Manual
• Certification status: shows certification and compliance information for the area in which the ADTS
is being used.
System Status
Opens the "Status" sub-menu. The "Status" sub-menu contains the following items:
• ADTS Touch: opens the "ADTS touch status" window containing the following items:
- ADTS Touch: shows the model number and serial number of the ADTS Touch in use.
- Battery: status information about the battery in use.
• ADTS: opens the "ADTS status" window containing the following items:
Sensors: shows related sensor status information as follows:
- Ps: sensor Ps status.
- Pt: sensor Pt status.
- Source: sensor source status.
- Vacuum: sensor vacuum status.
Pumps: shows related information about the following pumps:
- Source pump: usage, shown in running hours and time to next service in hours.
- Vacuum pump: usage, shown in running hours and time to next service in hours.
• Communications: shows the communication status between the ADTS Touch and the ADTS:
1
To view the status information for the ADTS Touch or ADTS:
1. Touch the image on the screen for the item of interest (1) or (2). Information related to that
item is displayed.
2. Touch the displayed information panel to close the panel.
• Software installed: information about the installed software and version numbers.
• History: opens the "History" sub-menu. The "History" sub-menu contains the following items:
- Calibration history: shows the "Calibration history" for:
- Ps: Sensor Ps history.
- Pt: Sensor Pt history.
K0553 Revision C
Figure 3-10 Communications main screen
3-21
2