Packaging - GE ADTS542F User Manual

ADTS542F/552F/553F/554F User Manual
2.1

Packaging

On receipt of the ADTS check the contents of the packaging against the following lists:
Standard
• ADTS5xxF
• ADTS Touch
• Mains cable
• K0554, Installation and Safety Guide.
Options
The following options are included, but not limited to (for a complete list of available options, refer
to product data sheet: ADTS542F, 920-648x).
• ADTS Touch batteries
• ADTS Touch extension cable
• Power supply adaptor and cables
• Threaded adaptors
• Accessories bag
• Hoses
• Front panel labels
• Backpack (ADTS542F only)
• ADTS Touch carry case
• Second slave ADTS Touch (not for ADTS542F).
Special Request
Please keep the special packing boxes so that the ADTS can be safely shipped for calibration,
repair or storage.
2.2 Packing for Storage or Transportation
To store the ADTS or to return it for calibration or repair carry out the following procedures:
• The ADTS should be at zero/ambient pressure. Disconnect the hose assemblies and stow in the
accessory bag.
• Switch OFF and disconnect from the electrical power supply.
• Close and latch the lid to the ADTS.
• The power supply cable should be placed in the original packing material.
• Place the ADTS in the original special packing box or appropriate transport container.
• Mark carton "FRAGILE" on all sides, top, and bottom of the container.
• The battery must be removed from the ADTS Touch during transportation.
• To return the ADTS for calibration or repair complete the return goods procedure as detailed in 2.3.
K0553 Revision C
CHAPTER 2 INSTALLATION
2-1