Setting Table - ABB REC 561 User Manual

1MRK 580 190-XEN
Page 4 - 24

6.2 Setting table

I/O system configuration
Table 3: Setting table for binary input module (BIM), binary output
module (BOM), and input/output module (IOM)
PARAMETER: SETTING RANGE: DESCRIPTION:
IOxx-BINAMEy 13 characters
IOxx-BONAMEy 13 characters
OscBlock 1-40 Hz
OscRel 1-40 Hz
Operation On, Off
ABB Network Partner AB
Version 1.0-00
Name of binary input No. y,
used for BIM and IOM. To be
set from CAP 531. For REL 531
it is also settable from SMS or
built-in MMI.
Name of binary output No. y,
used for BOM and IOM. To be
set from CAP 531. For REL 531
it is also settable from SMS or
built-in MMI.
Oscillation blocking frequency,
common for all channels on I/O
module BIM. To be set from
SMS or built-in MMI.
Oscillation release frequency,
common for all channels on I/O
module BIM. To be set from
SMS or built-in MMI.
I/O module in operation. Opera-
tion Off puts the I/O module in a
non-active state. To be set from
SMS or built-in MMI.