Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
- Pick -up Station Group
A station group may be assigned to Pick-up
Group
station.
member can pick up the call that is ringing
other member by dialing group pick-up code if
they belong to the same pick-up group. While
Auto Pickup is assigned, another hunt member
can pick up the call automatically by just
pressing [MON] button or off-hook. And All
Group Member Ringing is assigned, all the
other stations are ringing also when a hunt
member that is Tone mode is ringing.
Admin Programming
n
Station Group (PGM 190)
n
Station Group Attribute (PGM 191)
Condition
1. A station can be a member of plural station
groups and the group should be the same
type of station group.
2. A station in DND/Forward state will not
receive group call.
3. Transferred ring to station group is not recalled.
4. When a call is received in a station group, the
call will be in the ring process before receiving
the
announcement
Announcement time. If no Station Group
announcement is assigned, the timer is
ignored. If the timer is set to 0, the call will
receive the announcement prior to the ring
process.
5. When
a
station
announcement (the 1
set to 0), Overflow timer is stated and ring is
provided
after
completely played.
st
6. Only the 1
announcement may be used for
guaranteed announcement.
7. If all stations in the group are busy when a
call is received, the call continues to wait for
an available station in the group. If queued,
the call may be sent to MOH until the call is
answered or disconnected.
8. If there is no available member in a group
because every member sets DND, UCD DND,
or call forward, all new calls to the group and
all queued calls in the group are rerouted to
Cir/Term/UCD/Ring
for
Station
group
has
guaranteed
st
announcement timer is
the
announcement
another destination. One of the following is
determined as the destination in the listed
order;
group
a. Overflow destination if assigned.
b. Alternative destination if the group is UCD
group and it is assigned.
9. If a call is not answered until Overflow Timer
expires, it will be sent to overflow destination
while the VMIB announcement is being
played.
10. If overflow destination is not assigned, the call
will be dropped when overflow timer expires.
11. If an Announcement Timer is set and no VMIB
number is assigned, the announcement is
ignored.
12. When the number of queued incoming calls
are over the pre-defined in UCD group, the
incoming
alternative destination is set and all members
are busy, incoming calls are not queued. All
calls are routed to alternative destination. If
overflow destination is programmed, the
queued
destination after overflow timer is expired.
13. Pick-up station group is for only intercom call.
14. Group pick-up doesn't work with a call of
station group pilot number. While trying to do
it, you will hear error tone.
Group
15.
If a member of the circular/terminal group is
on DND and the pilot hunt is off, DND feature
will work.
TIME & DATE SETUP BY DIGITAL
NETWORK
is
Description
In an outgoing call, the ISDN network will send
time & date in CONNECT message when the
called party answers. The time & date of the
system may be modified by next time & date
optionally one time in a day.
Operation
To set the time & date by Digital Network,
1. Press the [TRANS/PGM] button.
3-25
System Features
CO
calls
will
be
call
is
re-routed
LDK-
dropped.
If
to
overflow
Advertisement
Table of Contents
