ABB i-bus
KNX
Start-up
3.1.1.1
Procedure
Insert the desired device into your project.
Import the current application program into the ETS.
Perform your parameterizations and program the device.
After you have parameterized a device, you can transfer the settings to a second device.
Right click the product and select Plug-in > Convert in the context menu for this purpose.
Then make the desired settings in the Convert dialog.
Finally, you must replace the physical address and
Should you wish only to copy individual inputs/outputs within a device, use the
parameter settings
34 2CDC 506 051 D0204 | JRA/S
function, p. 35.
delete the old device.
Copying and exchanging