Configuring with Web Based Management
4.4 "System" menu
4.4.7
SNMP
4.4.7.1
General
Configuration of SNMP
On this page, you make the basic settings for SNMP. Enable the check boxes according to
the function you want to use.
Description
The page contains the following boxes:
● "SNMPv1/v2c/v3" drop-down list
Select the SNMP protocol from the drop-down list. The following settings are possible:
– "-" (disabled)
– SNMPv1/v2c/v3
– SNMPv3
● "SNMPv1/v2c Read Only" check box
If you enable this option, SNMPv1/v2c can only read the SNMP variables.
Note
Community String
For security reasons, do not use the standard values "public" or "private". Change the
community strings following the initial installation.
● "SNMPv1/v2c Read Community String" input box
Enter the community string for read access of the SNMP protocol.
82
SNMP is disabled.
SNMPv1/v2c/v3 is supported.
Only SNMPv3 is supported.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02