Passwords - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

4.4.4.3

Passwords

There are files to which access is password protected. To load the file on the device, enter
the password specified for the file on the WBM page.
Description
The table has the following columns:
● Type
Shows the file type.
● Description
Shows the short description of the file type.
● Enabled
When selected, the password is used. Can only be enabled if the password is configured.
● Password
Enter the password for the file.
● Password Confirmation
Confirm the password.
● Status
Shows whether the current settings for the file match the device.
– valid
– invalid
– '-'
Procedure
1. Enter the password in "Password".
2. To confirm the password, enter the password again in "Password Confirmation".
3. Select the "Enabled" option.
4. Click the "Set Values" button.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
The settings are valid.
The settings are invalid.
Status cannot be evaluated.
Configuring with Web Based Management
4.4 "System" menu
75