Nat; Masquerading - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management
4.7 "Layer 3" menu
● MAC Address
Displays the MAC address of the selected interface.
● DHCP
Enable or disable the DHCP client for the interface.
Note
If you want to operate the device as a router with several interfaces, disable DHCP on all
interfaces.
● IP Address
Enter the IP address of the interface. IP addresses must not be used more than once.
● Subnet Mask
Enter the subnet mask of the subnet you are creating. Subnets on different interfaces
must not overlap.
● Address Type
Shows the address type. The following values are possible:
– Primary
– Secondary
● TIA Interface
Specify whether or not this interface will become the TIA Interface.
4.7.3

NAT

4.7.3.1

Masquerading

On this WBM page, you enable the rules for IP masquerading.
138
the first subnet of the interface.
All further subnets of the interface.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02