Network; Network Services; Network Access - Bosch AUTODOME IP 4000i User Manual

56 en | Network
10

Network

The settings on these pages are used to integrate the device into a network. Some changes
only take effect after a reboot. In this case Set changes to Set and Reboot.
1.
2.
The device is rebooted and the changed settings are activated.
10.1

Network Services

This page shows an overview of all available network services. Use the checkbox to activate or
deactivate a network service. Click on the settings symbol next to the network service to go to
the settings page for this network service.
Select the appropriate network services from the list on the page:
–
–
–
–
–
–
–
–
–
–
–
–
–
10.2

Network Access

The settings on this page are used to integrate the camera into an existing network.
Automatic IPv4 assignment
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you
can activate acceptance of IP addresses automatically assigned to the camera.
Certain applications (Bosch Video Management System, Archive Player, Configuration
Manager) use the IP address for the unique assignment of the unit. If you use these
applications, the DHCP server must support the fixed assignment between IP address and
MAC address, and must be appropriately set up so that, once an IP address is assigned, it is
retained each time the system is rebooted.
If the network has a DHCP server for the dynamic assignment of IP addresses, select On or On
plus Link-Local to automatically accept the DHCP-assigned IP address.
If no DHCP server is available select On plus Link-Local to automatically assign a Link-Local
(Auto-IP) address.
For certain applications, the DHCP server must support the fixed assignment between IP
address and MAC address, and must be appropriately set up so that, once an IP address is
assigned, it is retained each time the system is rebooted.
IPv4
Fill in the 3 fields in this section of the screen.
IP address
Enter the desired IP address for the camera in this field. The IP address must be valid for the
network.
2018.05 | 1.1 |
Make the desired changes.
Click Set and Reboot.
HTTP
HTTPS
RTSP
RCP
FTP
SNMP
ISCSI
UPNP
NTP Server
Discover
ONVIF Discover
GB/T 28181
Password reset mechanism
User Manual
AUTODOME IP 4000i/AUTODOME IP 5000i/
AUTODOME IP 5000i IR
Bosch Security Systems