Siemens SIMATIC Ident Operating Manual page 56

Operating the software
5.4 The tabs of the RF620R/RF630R readers
● Stop
● Deleting the display
A progress bar indicates that the recording is active.
List of identified transponders
After you have started recording, all the transponders identified by the reader are listed in the
table.
Table 5- 8
Property
OK
Tag ID
Antenna
RSSI
RSSI min
RSSI max
Mean RSSI
Reads
LastObs.
DT glimpsed
56
Stopping the recording
Existing values from the last recording are deleted.
Displayed properties of the recognized transponders
Description
Symbol indicating whether the transponder was detected as valid by the reader.
If the reader is operating in Smoothing mode, the transponder needs to be
detected Observed Threshold number of times.
EPC ID of the detected transponder
Antenna with which the transponder was detected. Only one antenna is ever
displayed here. With this display, you cannot recognize the antenna or antennas
that detected the transponder or whether several antennas detected the
transponder.
RSSI value with which the transponder was last read.
Minimum RSSI value of the transponder. Calculated over all successful
inventories.
Maximum RSSI value of the transponder. Calculated over all successful
inventories.
Average RSSI value of the transponder.
Number of successful inventories of the transponder.
Time stamp when the transponder was last read.
Time that has elapsed in [ms] between the first and last successful transponder
read.
Operating Manual, 09/2012, C79000-G8976-C292-01
SIMATIC RF-DIAG