The "Tag Events" Tab - Siemens SIMATIC Ident Operating Manual

5.3.5

The "Tag Events" tab

Using the "Tag Events" tab, you can verify tag events quickly and simply.
Figure 5-5
From the drop-down list, you can select the data source with which the recording will be
made.
Controlling recordings
Using the "Single", "Start", "Stop" and "Clear View", you can control the recording of the
events:
● Single setting
● Start
SIMATIC RF-DIAG
Operating Manual, 09/2012, C79000-G8976-C292-01
The "Tag Events" tab
A single read of the selected data source is triggered and the measured values obtained
are displayed.
Any existing values from a previous recording are not deleted. A new recording is then
started. Reads of the selected data source are performed cyclically.
5.3 The tabs of the RF640R/RF670R readers
Operating the software
41