Siemens Simatic ET 200MP Manual page 12

Product overview
2.1 Properties
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Parameter assignment in RUN
Isochronous mode**
Module-internal Shared Input (MSI)
Configurable submodules / sub-
modules for Shared Device
Channel 0 and 1 optionally with
counter function*
* Requirement for counter function: Interface module IM 155-5 firmware version V3.0 or higher or CPU S7-15XX firmware
version V1.7 or higher
** Not possible in counting mode
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following accessories are supplied with the module and can also be ordered separately
as spare parts:
● Labeling strips
● U connector
● Universal front door
Other components
The following component must be ordered separately:
Front connectors, including potential jumpers and cable ties
For more information on accessories, refer to the system manual S7-1500/ET 200MP
(http://support.automation.siemens.com/WW/view/en/59191792).
12
Firmware version
of the module
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V2.0.0 or higher V13 Update 3 or higher
V2.0.0 or higher V13 Update 3 or higher
V2.1.0 or higher V13, SP1 with HSP 0118 or
Configuration software
STEP 7
(TIA Portal)
V12 or higher
V12 or higher
V12 or higher
V12 or higher
(PROFINET IO only)
(PROFINET IO only)
higher
DI 32x24VDC HF digital input module (6ES7521-1BL00-0AB0)
GSD file in STEP 7
(TIA Portal) V12 or higher, or
STEP 7 V5.5 SP3 or higher
--- / X
X
X
---
X
(PROFINET IO only)
X
(PROFINET IO only)
X
(PROFINET IO only)
Manual, 09/2016, A5E03485935-AF