Make Connections - Bosch DIVAR 2000 Operation Manuals

Network/hybrid video recorder
Hide thumbs Also See for DIVAR 2000:
Table of Contents

Advertisement

12
en | Installation
Qty
1
1
4.2

Make connections

Notice!
Use only PoE approved devices.
1.
Connect the cameras to the
2. Connect monitor A to the
3.
Connect the USB mouse to a USB port (back or front panel).
Optional connections (depending on model)
1. Connect a second dual monitor to the optional
2. Connect up to 4 audio signals to the
3. Connect 1 microphone to the
4. Connect 1 RCA (CINCH) output from
5. Connect up to 16 alarm inputs to the
blocks) – see description in Hardware setup.
6. Connect up to 6 alarm outputs to the
blocks) – see description in Hardware setup.
7. Connect a pan/tilt/zoom control unit to the
description in Hardware setup.
8.
Connect to your network via the RJ45 ETHERNET connector
Pair Category 5e cable).
9. Connect extra video out cables to the
devices (only for DIVAR 5000 hybrid).
10. Connect a Bosch Intuikey keyboard cable to the
adaptor (only for DIVAR 5000) – see description in Hardware setup.
11. Connect an eSATA storage device to the
12. Connect the DIVAR to an approved ground point. Use the ground screw (supplied in the
accessory bag) to attach a ground cable to the DIVARback panel ground point
2016.09 | v1.0 | AM18-Q0717
Component
Split cable for loop through to 25-pin D-connector (only for DIVAR 5000 hybrid
models)
RJ11 adapter cable to connect Bosch Intuikey keyboard
Installation guides for Recorder, HDD, plus safety instructions
If using PoE connector, power is supplied to the camera via the Ethernet cable
compliant with the Power-over-Ethernet standard.
Use an external switch to connect more cameras to a single RJ45
Operation Manual
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
DIVAR 2000 / DIVAR 3000 / DIVAR
or
connectors.
output, or the
connector.
RCA (CINCH) inputs.
RCA (CINCH) input.
to the monitor or an audio amplifier.
connector (via the supplied terminal
connector (via the supplied terminal
(only for hybrid models) – see
ports if loop through is required to other
connector using the supplied
connector (only for DIVAR 5000).
5000
port.
output.
(use Shielded Twisted
.
Bosch Security Systems

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Divar 3000Divar 5000

Table of Contents