Samsung MR-DH00 Technical Data Book page 17

How to set the user mode
Note
While setting the data, you can use the [∧]/[∨] buttons to set the range of SEG used.
Cu
(Main Menu) will be displayed, and
you can press the [∧]/[∨] buttons to
select No.4, which will set the current
time.
(2) Press the [＞]
Press the [∧]/[∨] buttons to select
date setting.
(3) Press the [＞]
Press the [∧]/[∨] buttons to select
the year ('00~'99).
(4) Press the [＞]
Press the [∧]/[∨] buttons to select
month(01~12).
(5) Press the [＞]
Press the [∧]/[∨] buttons to select
day(01~31).
and you can exit to the sub-menu.
(2) Refer to the Wired Remote Controller's User Set list on the next
[∧]/[∨] buttons, select a main menu number and press the [＞] button
to enter the sub-menu setting screen.
[∧]/[∨] buttons, select a sub-menu number and press the [＞] button
to enter the data setting screen.
[∧]/[∨] buttons, change the settings and press the [＞] button to
move to the next setting.
Press the [∧]/[∨] buttons to select no.
minute'.
(8) Press the [＞]
Press the [∧]/[∨] buttons to select
day (Sun~Sat).
(9) Press the [＞]
Press the [∧]/[∨] buttons to toggle
between AM and PM.
(10) Press the [＞]
Press the [∧]/[∨] buttons to select
the hour (01~12).
(11) Press the [＞]
Press the [∧]/[∨] buttons to select
minute (00~59).
(12)
you can exit to general mode.
17