Samsung MR-DH00 Technical Data Book page 134

Control Systems
Power distribution system
IV IV
1. Electricity meter interface module
MIM-B16N
9) MIM-B16N menu structure
Main menu
Monitoring
Configuration
134
Sub menu
LCD window.
Ex)
LCD
31H
...
37H
Option switch setting to ON is displayed with the position number at the corresponding
positions while setting to OFF is shown with the mark 'X'.
Ex)
Option SW 1.2 Option S/W
1X
Ex)
1.3 Micom Ver.
Micom version
130123
Ex)
1.4 DB Code
DB Code
DB91-01128A
The password, which is asked to enter to change the configuration setting, is used to prevent
Ex)
You can select each channel's meter type.
Meter type
You can set pulse rate of meter which connected to each channel.
[Range]
Date & time You can set current date and time.
You can set Enable/Disable state of each channel.
Channel use
Value set Initial meter value must be set as a starting point for each of the enabled interface channels.
Value clear Each or all the initial meter values are cleared when selected.
Description
SW2 setting 1.Monitoring
1.1 Address
1
...
1.1 Address
7 58 30 FF
Address Fixed
Example display : 1X
Option switch 1 : On
Option switch 2 : Off
3
/pulse