Ipv6 Multicast Routing And Forwarding Configuration Examples; Ipv6 Multicast Forwarding Over A Gre Tunnel - HP MSR2003 Configuration Manual

Task
Display information about the IPv6 multicast
routing table.
Display the RPF route information of the
specified IPv6 multicast source.
Clear statistics for IPv6 multicast forwarding
events.
Clear forwarding entries from the IPv6
multicast forwarding table.
Clear routing entries from the IPv6 multicast
routing table.
NOTE:
When a routing entry is removed, the associated forwarding entry is also removed. When a forwarding
entry is removed, the associated routing entry is also removed.
IPv6 multicast routing and forwarding configuration
examples

IPv6 multicast forwarding over a GRE tunnel

Network requirements
As shown in
Router B does not support IPv6 multicast. OSPFv3 is running on Router A, Router B, and Router C.
Configure a GRE tunnel so that the receiver host can receive the IPv6 multicast data from Source.
Figure 75, IPv6 multicast routing and IPv6 PIM-DM are enabled on Router A and Router C.
Command
display ipv6 multicast [ vpn-instance vpn-instance-name ]
routing-table [ ipv6-source-address [ prefix-length ] |
ipv6-group-address [ prefix-length ] | incoming-interface
interface-type interface-number | outgoing-interface
{ exclude | include | match } interface-type interface-number ]
*
display ipv6 multicast [ vpn-instance vpn-instance-name ]
rpf-info ipv6-source-address [ ipv6-group-address ]
reset ipv6 multicast [ vpn-instance vpn-instance-name ]
forwarding event
reset ipv6 multicast [ vpn-instance vpn-instance-name ]
forwarding-table { { ipv6-source-address [ prefix-length ] |
ipv6-group-address [ prefix-length ] | incoming-interface
{ interface-type interface-number } } * | all }
reset ipv6 multicast [ vpn-instance vpn-instance-name ]
routing-table { { ipv6-source-address [ prefix-length ] |
ipv6-group-address [ prefix-length ] | incoming-interface
interface-type interface-number } * | all }
251