Task
Display information about the
register-tunnel interface.
Display BSR information in the
PIM-SM domain.
Display information about the
routes used by PIM.
Display C-RP information in the
PIM-SM domain.
Display DF information in the
BIDIR-PIM domain.
Display PIM information on an
interface.
Display PIM neighbor information.
Display PIM routing table
information.
Display RP information in the
PIM-SM domain.
Display statistics for PIM packets.
PIM configuration examples
PIM-DM configuration example
Network requirements
As shown in
VOD streams are sent to receiver hosts in multicast. The receiver groups of different organizations
•
form stub networks, and one or more receiver hosts exist in each stub network.
•
The entire PIM domain operates in the dense mode.
Host A and Host C are multicast receivers in two stub networks N1 and N2.
•
IGMPv2 runs between Router A and N1 and between Router B, Router C, and N2.
•
Figure
43:
Command
display interface [ register-tunnel [ interface-number ] ] [ brief
[ description | down ] ]
display pim [ vpn-instance vpn-instance-name ] bsr-info
display pim [ vpn-instance vpn-instance-name ] claimed-route
[ source-address ]
display pim [ vpn-instance vpn-instance-name ] c-rp [ local ]
display pim [ vpn-instance vpn-instance-name ] df-info [ rp-address ]
display pim [ vpn-instance vpn-instance-name ] interface [ interface-type
interface-number ] [ verbose ]
display pim [ vpn-instance vpn-instance-name ] neighbor
[ neighbor-address | interface interface-type interface-number |
verbose ] *
display pim [ vpn-instance vpn-instance-name ] routing-table
[ group-address [ mask { mask-length | mask } ] | source-address [ mask
{ mask-length | mask } ] | flags flag-value | fsm | incoming-interface
interface-type interface-number | mode mode-type | outgoing-interface
{ exclude | include | match } interface-type interface-number ] *
display pim [ vpn-instance vpn-instance-name ] rp-info [ group-address ]
display pim statistics
115