Variable Monitor - Mitsubishi Electric CR750-Q Instruction Manual

3Explanation of operation methods
7) Press the function key corresponding to "CLOSE", and return to the monitor menu screen.
<MONITOR>
1.INPUT
3.INPUT REG.
5.VARIABLE
Finish the monitor
If the [MONITOR] key is pressed, the monitor will be finished always and it will return to the original screen.

(5) Variable monitor

It is the function to display or change the details of the variable currently used by the program.
1) Press the [5] key in the monitor menu screen, and display the variable monitor screen.
<MONITOR>
1.INPUT
3.INPUT REG.
5.VARIABLE
123
2) Specify the target program of the monitor with the slot number.
Press the function key corresponding to "SLOT", and input the slot number.
Set up "1", if the multitasking function is not being used.
<VARIABLE>
SLOT : 1 TEST
=
=
=
SLOT NAME
3) Display the slot number and the program name after "slot:".
Press the function key corresponding to the "NAME", and input the variable name to monitor.
<VARIABLE>
SLOT : 1 5
=
=
=
SLOT NAME
3-80 Operating the monitor screen
2.OUTPUT
4.OUTPUT REG.
6.ERROR LOG
123
CLOSE
2.OUTPUT
4.OUTPUT REG.
6.ERROR LOG
CLOSE
123
CLOSE
VALUE
123
VALUE CLOSE
<FILE/EDIT> 1/20
1 08-04-24 17:20:32
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
POSI. 123
EDIT
<VARIABLE>
SLOT : 1 TEST
=
=
=
123
SLOT NAME VALUE
<VARIABLE>
SLOT ( 1_ )
123
<VARIABLE>
NAME ( M1_ )
123
Rem 136320
22490
694
2208
1851
NEW COPY ⇒
CLOSE
CLOSE
CLOSE