Removing Staple Jams From The Finisher Unit - Canon FINISHER-C1 Service Manual

5) Set a new staple case.
Figure 1-312
Reference:
You may set no more than one staple
cartridge at a time.
Make sure that the new cartridge is one
specifically designed for the finisher unit.
6) Pull the length of tape (used to hold the
staples in place) straight out.
Figure 1-313
7) Push in the stapler unit until the green le-
ver returns to its original position.
Figure 1-314
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPTION
8) Check to make sure that the stapler has
been locked in place, and close the front
cover.
Figure 1-315
C. Removing Staple Jams
from the Finisher Unit
If the copier indicates the finisher unit
staple jam message, perform the following to
remove the jam.
1) Remove the stack waiting to be stapled
from the delivery tray.
Figure 1-316
2) Open the front cover.
Figure 1-317
1-11