Canon FINISHER-C1 Service Manual page 139

7) Remove the three screws [4] used to fix the
swing guide unit [3] in place.
8) Hold the swing guide unit [5] with both
hands, and remove it as if to lift it to the
front.
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 MECHANICAL CONSTRUCTION
[4]
Figure 4-203A
[5]
Figure 4-204A
[3]
4-9