Timer 6 Advanced Configuration Level - ABB COMMANDER 1900 Series User Manual

• Timer
6 ADVANCED CONFIGURATION LEVEL
6.1 Set Up Timer
Information.
• Two timers available.
• 'ON' duration of 1 minute to 167 hours 59 minutes (1 week).
• Programmable Timers – can operate on specific days, hours or minutes for an exact period of time.
• Timer 'ON/OFF' states – can be used to energize relay outputs, acknowledge alarms, stop the chart, select auto/
manual control modes and local/remote set points, in logic calculations, start/stop/reset totalizers, reset maths results
or run/hold/reset profile programs/segments.
Example A – setting up timer:
• Monday enabled
• Tuesday disabled
• Wednesday disabled
• Thursday disabled
• Friday enabled
• Saturday disabled
• Sunday disabled
• on hour set to 10.00am
• on minute set to 30 minutes
• duration in hours set to 49 hours
• duration in minutes set to 30 minutes
Monday Tuesday
10.30am
– shows timer option programmed to energize relay output for 49 hours 30 minutes over a two day period
Example A
28
Wednesday Thursday
12.00am
Friday Saturday
10.30am
Sunday
Relay On
Relay Off
12.00am