ABB COMMANDER 1900 Series User Manual page 25

...5.2 Set Up Maths (Standard Maths Block)
FUNCtN
Std
bLKx–1
CNSt–8
PV–1
bLKx. – 2
MEdIAN
ENd
bLKx. – 3
CNSt–8
PV–1
bLKx. – 4
MEdIAN
ENd
bLKx. – 5
CNSt–8
PV–1
bLKx. – 6
MEdIAN
ENd
bLKx. – 7
CNSt–8
PV–1
SELECt
––––––
Maths Block n /Element 1 (operand 1)
Select the source required for element 1.
For description of operand sources for this and subsequent frames, refer to Table 5.1 on page 26.
Maths Block n / Element 2 (operator 1)
Select the operator required for element 2:
MEdIAN
– median
LO SEL – low select
HI SEL
– high select
dIVIdE
– divide
MULt – multiply
MINUS
– minus
Add
– add
ENd – end
Maths Block n / Element 3 (operand 2)
Select the source required for element 3.
Maths Block n / Element 4 (operator 2)
Select the operator required for element 4.
For description of operators, refer to
Maths Block n / Element 5 (operand 3)
Select the source required for element 5.
Maths Block n / Element 6 (operator 3)
Select the operator required for element 6.
For description of operator sources, refer to
Note. If median is selected in element 2, element 4 automatically becomes median and
element 6 becomes end.
Maths Block n / Element 7 (operand 4)
Select source required for element 7.
Return to
Select Maths Function
5 ADVANCED CONFIGURATION LEVEL...
Maths Block n / Element 2
Maths Block n / Element 2
frame.
• Maths
frame.
frame.
23