GE GE314 Operating Manual page 35

9.2.4 READER#2 MODE
READER#2 MODE setting is the same as 9.2.3 READER#1 MODE setting.
Note: READER#2 is an external Exit reader of the unit.
ID(PIN) ONLY: The door is accessible by just presenting the proximity card(or Press the ID Number).
ID+ P/W: The door is accessible by presenting a card and Password.
9 .2.5 READER#1 PIN INPUT
☞. This function is for USE/UNUSE the keypad inputs for the Reader#1. The default setting is UNUSE the
keypad inputs. If you want to access the door by entering the user ID by keypad, set this mode USE. You
have to set this mode USE when the unit is operating with Password.
9.2.6 READER#2 PIN INPUT
READER#2 PIN INPUT setting is the same as 9.2.5 READER#1 PIN INPUT setting.
9.2.7 COMMUNICATION ADDRESS SETTING
☞ The default Communication Address is "000" and set a different COMM Address for each unit in the loop. .
35