Operation; Normal Operation; Default Setting - GE GE314 Operating Manual

8. OPERATION

8.1 NORMAL OPERATION

Power on
When the power is applied to GE314, the Red LED is turned on.
Registered card reading
When a registered card (or PIN) is read and his/her fingerprint is verified, the Door (Relay#1) will open for 3
seconds (Default) with the Green LED on.
Exit Button
When the Exit button is pressed, the Door (Relay#1)
Alarms
When an unregistered card is read or his/her fingerprint is not verified, the access is denied and the Alarm
(Relay#2) will be activated for 3 seconds with the Yellow LED on.

8.2 DEFAULT SETTING

When you operate the system for the first time or the system initialized, the factory setting values (default
settings) will be stored in the mem ory. You may change the settings for the desired application.
27
will open for 3 seconds with the Green LED on.