Removing attachments
GB
Switching on/off / Selecting a heat level
Styling
8
■
First switch the appliance off and allow it to cool down..
■
Pull the attachment from the attachment insertion slot
■
When you have inserted the required attachment and connected the plug
with the mains power socket, you can now switch the appliance on with the
level switch
and select the output level:
–
"0"
The appliance is switched off
–
"C"
for a cold air stream (Cool Shot)
–
"1"
for a warm air stream
–
"2"
for a hot air stream
■
You switch the appliance off by sliding the level switch
(= appliance off).
■
To fix the styling, you can move the level switch
fixed by the cool air stream.
Select the desired attachment:
–
for long hair and large curls the large styling brush
–
for shorter hair or small curls the small styling brush
■
Wind the slightly damp strand of hair around the selected styling brush
■
Switch the appliance on at level 1 or 2.
■
When the strand is dry, slide the level switch
has cooled.
■
Press the roll-out button
out of the strand. The styling brush
the strand can be done easily.
■
Proceed with the other strands in the same way.
to "C". Wait until the strand
and simultaneously pull the appliance downwards
/
rotates with it, so that unwinding
.
to the position "0"
to "C". The styling will be
.
.
/ .
SWC 300 C1