Table of Contents
Advertisement
Section 4 - Configuration
Select PPPoE if your Internet connection requires you to enter a username and password. This information is provided by your Internet Service
Provider (ISP).
PPPoE Session:
Choose Share with IPv4 to re-use your IPv4 PPPoE username and
password, or Create a new session.
Enable IANA:
Enable this option to enable Internet Assigned Numbers Authority
IPv6 Compatibility.
Username:
If you selected Create a new session above, enter the PPPoE
username provided by your ISP here.
If you selected Create a new session above, enter the PPPoE
Password:
password provided by your ISP here.
Address Mode:
Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
IP Address:
Enter the IP address provided by your ISP (Static IP only).
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
DNS Type:
Select either Obtain DNS server address automatically or Use the
following DNS address.
If you selected Use the following DNS address above, enter the
Primary DNS
Server:
primary DNS server address.
Secondary DNS
If you selected Use the following DNS address above, enter the
Server:
secondary DNS server address.
D-Link DSL-5300 User Manual
PPPoE
51
- Quick Links:
- Manual Setup
- Setup Wizard
Hide quick links:
Advertisement
Table of Contents
