Dsl; Dsl-5300 - D-Link DSL-5300 User Manual

Section 4 - Configuration
Click the DSL button to see the DSL hardware connection information.
DSL Phy Displays the DSL Phy version.
Version:
Cable Status: Displays the current cable status.
DSL Status: Displays the current negotiation state of the DSL port.
Mode: Displays the current DSL mode.
Link Power Displays the current link power state.
State:
SNR Margin (0.1
The DSL connection's signal-to-noise ratio is listed here.
dB):
Attenuation (0.1 The DSL connection's attenuation is listed here.
dB):
Output Power
The DSL connection's power output is listed here.
(0.1 dBm):
Attainable Rate The measured maximum attainable rate is listed here.
(Kbps):
Rate (Kbps):
The negotiated connection speed is listed here.
CRC Errors:
Displays the number of Cyclic Redundancy Check errors.
FEC Errors: Displays the number Forward Error Correction Errors.
HEC Errors: Displays the number of Header Error Control Errors.
Click the Go to settings button to be taken to Internet on page 29.
D-Link DSL-5300 User Manual

DSL

24