RUGGEDCOM WiN5100/WiN5200
User Guide
Figure 76: Authentication Setting pane
4.
The Configured Authentication field displays the current configuration setting: Null or EAP.
5.
The Outer NAI field displays the outer Network Access Identifier.
Section 6.5.2.2
Configuring EAP-TLS Authentication
On the EAP-TLS pane, you configure Extensible Authentication Protocol - Transport Layer Security
authentication by specifying the authentication realm. After configuring EAP-TLS, you must reboot the CPE.
Procedure: Configuring EAP-TLS
1.
Click the WiMAX button. The Scanner Settings pane appears.
2.
In the options panel, click the Authentication link. The Authentication Method pane appears.
On the The Authentication Method pane, click the Set TLS button. The EAP TLS pane appears.
3.
Figure 77: EAP TLS pane
4.
In the Realm field, type the authentication realm.
5.
After changing the Realm field, reboot the CPE:
a.
Click the Management button. The System Functions pane appears.
Configuring EAP-TLS Authentication
Chapter 6
CPE Management Interface
89